Outdoor LED floodlights and their tension standards

Comments · 104 Views

In order for this lighting to do its job efficiently and safely, several things must be considered. On the one hand, spotlights are best placed towards the ground to avoid light pollution or higher than human height to get rid of "flashes" in the eyes.

However, the fact that these elements are installed outdoors is far from a mere usage recommendation and requires mandatory compliance regulations. They must operate at very low voltages, both alternating current (AC) and direct current (DC). In order to comply with regulations, the voltage for all outdoor products is typically 12 VDC/VAC or 24 VAC. Although there are special cases: there are also outdoor LED floodlights for 220 VAC, which have better protection, they are not recommended for areas that are in very direct contact with water to avoid electric shock problems and, therefore, possible accidents billboard light discount.

Which IP protection indices are necessary?
To protect against severe weather, exposure to water or changes in temperature, the IP protection index is one of the most important numbers when choosing an outdoor LED floodlight. For these cases, IP65 and IP66 indices are recommended, as they ensure the best protection against dust or rain. But there is a higher indicator: IP67 and IP68, which are the highest degree of protection. A floodlight with this index can even be submerged in water; for a floodlight with an IP67 rating, it should withstand at least 30 minutes of submersion in one meter of water, although it is always the manufacturer who confirms these numbers exactly LED Stadium Flood Lights.

tint of floodlights
While outdoor lighting is not as patterned as indoor lighting (for example, the size of the room dictates the number of light spots), the ends of the illuminated area must also be considered. This is where personal taste or exact needs (e.g. color and temperature of light) come into play. These are the two tones that can be selected:

Monochrome: Without a doubt, the most common. Depending on where they are installed, you can choose from warm white, neutral white, or cool white.
RGB: The use of LEDs opens up a range of options for choosing different colored lights Parking lot outdoor/underground. With RGB LED floodlights, you can choose between three primary colors (red, green, or blue), which are responsible for generating additional hues such as orange, pink, purple, yellow, cyan, and white.

Comments