We Tell Maintenance on PVC Celuka Board

Comments · 118 Views

1. First of all, note that the cutting should be carried out according to the actual size of the room floor division. When unloading PVC celuka board, lay the soft pvc board flat on the ground or operating platform, draw a cutting line on the board, and cut with a V-shaped slit cutter. The

 

1. First of all, note that the cutting should be carried out according to the actual size of the room floor division. When unloading PVC celuka board, lay the soft pvc board flat on the ground or operating platform, draw a cutting line on the board, and cut with a V-shaped slit cutter. The edge of the board should be cut into a smooth groove, and the angle of the groove and the mouth of the two boards is about 55 degrees. The day before the soft pvc floor is formally pasted, it should be pre-laid according to the grid. When paving, try to take care of the same color tone and the same thickness.
2. The soft board should be maintained regularly, and all kinds of dirt on the ground should be removed in time. To remove the oil, pour the stock solution of the water-based degreaser onto a towel to wipe. Large areas of grease can be cleaned with a floor scrubbing machine; black offset printing can be added by a polishing machine. The white polishing pad is polished. For long-time black offset printing, you can pour the strong black offset remover directly on the towel and wipe it; for glue or chewing gum, use a professional strong glue remover to directly pour it on the towel and wipe it off.
3. It is forbidden to soak the floor in water. Although some floors use waterproof glue to block the water source, whoever soaks it for a long time will seriously affect the service life of the plastic floor. Use a water absorber to absorb the water in time during the cleaning process.
4. Shorten the maintenance period and increase the waxing frequency of high wall wax for places with a lot of people and wear.
5. It is forbidden to use hard and rough cleaning tools, such as steel wire balls, scouring pads, etc., to prevent sharp objects from colliding with the elastic floor.
6. Foot pads can be placed at the entrances of public places with high traffic to prevent sharp objects from colliding with the elastic floor.

We are one of the 4x8 pvc foam sheet supplier and welcome to your come and purchase!

 

Comments