Ball type load cell will not reduce performance due to the characteristics of special materials and structural design


Each ball type load cell should have a different dynamic response characteristic and rated capacity and should be used to sense the load applied by the loaded/unloaded truck on the platform.

  Precision ball type load cell, the center of the load cell is a single ball, and the ball cup is on the top of the ball.

  Each ball type load cell should have a different dynamic response characteristic and rated capacity and should be used to sense the load applied by the loaded/unloaded truck on the platform. It should be made of special alloy tool steel to provide maximum impact and overload resistance. The stress generated in each sensor should be sensed by foil strain gauges. The ultimate overload capacity of the ball-type load cell should ensure that the system has a sufficiently high overload capacity.

  The ball-type load cell should be completely sealed, even if it works in harsh environments, it will not reduce its performance due to the characteristics of special materials and structural design. The influence of temperature on sensitivity and linearity should be kept low over a wide range. In addition, the load cell should have good shielding, and its output will not be affected by nearby stray magnetic fields.

  double shear beam load cell is also our product, welcome to consult and purchase.