Now the HP photo smart printer is out with new features so that it can meet the need of the user and also there are some amazing options as well which includes the mobile printing, direct Wi-Fi, wireless connection etc. Actually when the printer have the many features then it can create the some problems while working on the Connect Mac To Hp Photosmart Printer

WHAT ARE THE SIMPLE STEPS TO CONNECT HP WIRELESS PRINTER TO MAC?

There are some steps in which you can connect the HP wireless printer to the Mac and that are given below such as:-

• Firstly you have to connect the HP photo smart printer to the Mac by the wired connection mode or you can say by wirelessly.
• Then you have to make sure that you should have to connect the printer and the Mac through the same internet connection by using the USB cable.
• Then you have to check that the printer should be on and all the initial setup process is over on the printer of yours.
• After that if you get the printer driver software for the HP model then go to the browser and then you have to navigate the 123.hp.com/setup site.
• Then you have to click the download button so that you can get the HP easy start guide software in the Mac of yours.
• After that you have to extract all the HP start files in which you need to accept all the terms and conditions.
• Then you need to click the continue button to open the files in the Mac of yours.
• Then you will see in the list that the connected printer name will be available in which you have to select the name of the printer in the detected devices.
• If in case it has been not detected by the easy start then you have to make sure that the printer of yours is turned on and then connect it through the USB cable or through the wireless connection firmly.
• Then you will see after detecting the device in which you have to select the printer and then click on the continue button to begin the procedure.
• After that you have to select the any one option which means the wireless connection option or the USB connection option.
• Then you have to reply to all the on screen questions so that you can move further printer software installation setup.
• At last you have to select all the install options in which you need to click the install button.

WHAT ARE RHE SOLUTIONS FOR IF THE PRINTER IS NOT ABLE TO CONNECT WITH MAC?

The solutions for the printer which is not able to connect with the Mac then they are given below:-

• Firstly you have to make sure that the Wi-Fi router of yours has to be working accurately do that you can get the good internet signal strength for the network setup.
• Then if you want to make the seamless wireless connection on the Mac then you have to check out the router band or the Bonjour support.
• After that you also have to make sure that the settings of the wireless in the HP printer of yours whether it is turned on or not.
• Then you will see if you have connected the HP printer and the Mac by using the USB cable then you have to check that the cable is defect free.
• After that you have to make sure that the green light should be in steady condition after the USB cable connection.
• But in case if the network signal is week then you need to place the Mac and the router near to each other.

At last you have to check that if you have already connected the Mac of yours to any virtual private network or not and then you need to disconnect it and this thing should be done before installing the printer software.