TUBELESS SNAP TIRE VALVE CLEANING PRECAUTION

Comments · 39 Views

After a car has been running for a period of time, it must wait for the tires to dissipate heat before refilling. This is because the tire temperature will rise when the vehicle is running, which has an impact on the air pressure.

 

 After a car has been running for a period of time, it must wait for the tires to dissipate heat before refilling. This is because the tire temperature will rise when the vehicle is running, which has an impact on the air pressure.

  In the process of using the Tubeless Snap Tire Valve, it needs to be kept clean for a long time, otherwise there will be some glitches during use. It is a small device that causes the tire to suffocate, but it needs attention. Pay attention to the following when cleaning the valve:

  1. After a car has been running for a period of time, it must wait for the tires to dissipate heat before refilling. This is because the tire temperature will rise when the vehicle is running, which affects the air pressure.

  2, check the valve. If the valve nozzle and the valve core are unevenly matched, there are convex and concave phenomena and other defects, it is not convenient to inflate and measure the air pressure.

  3. Pay attention to clean aeration. The filled air must not contain moisture and oil to prevent deterioration and damage of the inner tube rubber.

  4. The inflation should not exceed the standard too much, nor should it be over-inflated due to the inability to inflate during long-term business trips. Excessive over-standard will cause the cord to stretch too much, causing its strength to decrease, and affecting the life of the tire.

  5. Inflate operation must be careful. Before inflating, wipe off the dust on the valve mouth and do not loosen the valve core. After the inflation is completed, use soap foam to wipe on the valve mouth to check for air leakage. If the air leaks, continuous small bubbles will be produced. Then tighten the valve cap to prevent sediment from entering the valve.

  Ningbo Sinppa Air Tools Factory was established in Oct 2001, covers over 10,000 square meters. It is an integrated set of industry and trade enterprises. Ningbo Jumson International Trade Co., Ltd is the branch company for import and export business. For now, there are about 150 employees and many different departments in Sinppa, including sales dep, purchasing dep, produce dep, technology dep, testing dep, and after-sales dep. Our business has extended all over to many countries in Europe, the Americas, and South Asia. Our company has many products, such as: Air Quick Coupler, welcome to visit our company!

 

Comments