Hex Nut Company Introduces How To Deal With Thread Damage

Comments · 41 Views

Hex Nut Company introduces the causes of thread damage of hexagon bolts:

 

Hex Nut Company introduces the causes of thread damage of hexagon bolts:

1. The silk thread is not selected. When choosing a tap, it is very particular. It should be selected in consideration of factors such as thread specification, aperture size, material used, hole type, precision tolerance and other factors.

2. In the process of tapping, the tapping speed is too high and the quality of the coolant is not good, causing problems in the bolts during production. Pay attention to controlling the speed of the equipment in daily life to ensure the quality of the coolant.

3. After the tapping is completed, there are burrs during the internal turning of the thread, which is mainly caused by the failure of the cone.

4. In the process of tapping, there are remaining thread fragments and residues that have not been removed during cleaning.

5. Because the rotation is unstable during the process of tapping and tapping, you mainly use automated equipment for tapping during naturalization. If the tapping procedure is not adjusted properly, it will cause rotation instability.

6. Cone wear causes inaccurate grinding data.

7. Excessive axial pressure.

Through the above introduction, 2H Heavy Hex Nuts Wholesaler hopes that you can simply refer to the content of this article in future use.

 

Comments