Forest King Log Splitter Parts Maintenance

Comments · 134 Views

The performance built 13 ton log splitter is a widely used crushing machinery, so it has many wearing parts inside, and these wearing parts need one-time maintenance and maintenance after a period of use

The performance built 13 ton log splitter is a widely used crushing machinery, so it has many wearing parts inside, and these wearing parts need one-time maintenance and maintenance after a period of use, so as to prolong these The service life of the vulnerable parts will reduce the maintenance cost of the wood shredder. In the same way, the output and crushing efficiency of the wood shredder will be improved, and the service life of the equipment will be prolonged. ?

Every 300 hours of operation, lubricating oil should be injected into the bearing, and the bearing should be taken out and cleaned carefully before injection, and the inside of the bearing seat should be cleaned before injecting lubricating oil to avoid the contamination of the lubricating oil by dirt. The use effect is reduced, and the injection of lubricating oil into the bearing is mainly used to improve the lubricity of the bearing and reduce the wear caused by it during work.

 

And every time the forest king log splitter parts work for a period of time, we have to check whether the tightness of the V-belt is appropriate, because the tightness of the V-belt will change after the wood shredder works for a long time, and if it is too tight, the wood will be crushed. The temperature of the bearing and motor of the machine continues to rise, which may even lead to the deformation of the bearing and the burning of the motor. If it is too loose, the wood shredder will be blocked due to insufficient crushing power. Therefore, whenever the wood shredder is working After a period of time, we will check whether the tightness of the V-belt is appropriate.

Comments