If you have a tree stump that you want to get rid of, there are several ways to do it. Some methods are easier and quicker than others.

First, dig around the stump to expose the roots. Then cut the roots with an axe. You can also use a winch to pull the stump out. According to us, hiring a professional will be a much safer and better option for you. If you are looking for stump milling (stubbfräsning) Stockholm services, visit the link given.

1. Digging

Using a mattock and shovel, dig around the stump, exposing as many of the largest roots as possible. Be careful not to hit any underground utilities as this can be very dangerous and costly to repair.

Before digging, be sure to contact a professional utility locator to identify and mark the locations of any underground lines. This will protect you from accidental damage and can save you a lot of headaches down the road.

Next, start by drilling spaced holes all over the surface of the stump and on the surrounding roots. Pour three to four ounces of stump removal chemical into each hole and water it. The chemical will soften the stump and rot the roots. After a few weeks, the roots will be loose enough to pull out with a shovel.

2. Grinding

If you’re not in the mood for digging up the stump and are willing to spend some money, hire a professional tree service company to grind it instead. The machine will shave the stump and its roots into mulch-like bits, making it easy to cover over with soil.

This method is less invasive than digging and can be done quickly if the stump has been recently cut down. However, it’s still a little pricey.

Stumps that have sprouted flimsy new shoots can be unsightly and may steal nutrients from the surrounding plants and soil. Unless you remove the new shoots, they’ll need to die out naturally over time. One way to speed this process is by using chemicals. Adding chemical to holes drilled into the stump encourages the growth of fungi that will decompose the stump and its root systems.

3. Burning

If you are unable or unwilling to use the physical removal methods of digging and grinding, you can try burning or using a chemical treatment to kill the stump. This method is faster than digging or grinding, but it still takes some time for the stump to rot and decay. It is best used in areas where open burning is allowed, such as rural areas.

To burn the stump, drill holes in it with a large drill bit and pour in potassium nitrate or Stump Out chemical granules. After it has been soaked in the granules, cover it with kerosene and ignite the stump with a flamethrower or torch. This will take several hours to turn it into ashes and should be done in an area where the fire won’t spread.

4. Chemical Treatment

If you don’t want to take the time or risk burning your stump, you can use a chemical approach. This speeds up the natural process of rotting and can help kill the stump without the need for physical removal.

This method uses a mixture of Epsom salt and a high-nitrogen substance (like commercial fertilizer or cow manure). You’ll need to drill holes into the stump, apply the rotting material and then cover with a plastic tarp. Wet the tarp with water regularly to keep it moist.

Once the rotting process has killed the stump, you’ll need to dig up the remaining wood. Be careful not to damage the roots, which can cause rot and invite unwanted diseases and pests into your yard. Bleach can also be used to rot stumps, but this is not recommended, as it exposes nearby grass and other plants to toxic levels of bleach.

5. Stump Removal

Stumps can be a safety and tripping hazard as well as a visual nuisance in your yard. Depending on the size and location, stump removal may require strenuous physical labor or professional equipment, but it is a necessary step to achieve an attractive and functional landscape.

Before beginning any physical stump removal, be sure to wear protective gear such as gloves, eye protection and steel-toed boots. Using a mattock or pick axe, dig around the stump and expose any roots that need cutting. If a stump is too large to be removed by digging, use a chainsaw to cut it as close to the ground as possible. Then, use a grinder or other power tool to cut through the remaining stump and any visible root system.