About The Use Of 1" Ratchet Buckle

Comments · 229 Views

In many cases, we may need to use a ratchet buckle, but there are many specifications of ratchet buckle, including 1" ratchet buckle and 2" ratchet buckle.

In many cases, we may need to use a ratchet buckle, but there are many specifications of ratchet buckle, including 1" ratchet buckle and 2" ratchet buckle. Today we take a look at some precautions for hoisting.

(2) During the installation process, if any problems are found, measures should be taken in time, and then continue to be lifted after handling.

(4) When the tower tank is hoisted by the slewing method or the overturning method, the hinged wrist installed at the bottom of the tower body must have the ability to resist the horizontal thrust generated during the lifting process. When the height is in place, make it slowly fall into the foundation to avoid accidents and deformation.

(5) When installing equipment on a frame or building, its strength and stability must meet the requirements of the installation conditions. After the equipment is installed and positioned, it must be connected and fastened or welded according to the requirements of the drawing, and only after the strength and stability required by the design are met, can it be disconnected, otherwise it must be temporarily fixed.

For more details, please visit the 2" ratchet buckle .

Comments