Most of the semi-flat screen printing machine design schemes are mainly designed and conceived by the workbench lift and the screen frame running up and down. The circulatory system of Flat Screen Printing Machine is: feeder→precise positioning→dropping→lowering to the ink plate, raising back to the ink plate→scraping stroke arrangement→rising to the ink plate→down to the ink plate→raising the plate→returning ink Itinerary → Eliminate precise positioning → Collect. Flat Screen Printing Machine manufacturers all look forward to the longer the service life of their Flat Screen Printing Machine, the better. Licheng Flat Screen Printing Machine Factory discussed with everyone how to increase the service life of the Flat Screen Printing Machine.

       Flat Screen Printing Machine maintenance should be carried out regularly, and the maintenance of machinery and equipment should be carried out unremittingly, which can increase the service life of the equipment and ensure a safe and comfortable office environment. Its specific content should include:

1. The Flat Screen Printing Machine must be tidy, clean, firm, moisturized, anti-corrosion, safety, etc. The work content, working methods, applied safety tools and raw materials, standards and common problems.
2. The operator of machinery and equipment should first check whether the pneumatic valve and switching power supply of the equipment are normal after arriving on duty every day, then start the machine and let the machine rotate at high speed for 3 to 5 minutes, and carefully listen for abnormal noise , If there is an abnormality, it must be cleared first and then the work can be carried out. The screws that must be clamped must be tightened before the machine runs.
3. The staff on duty must ensure that the entire equipment of the machine, corroded or flammable materials cannot be placed on the surface of the machine, and the printing ink and dirt on the machine equipment should be cleaned and cleaned when handing over.
4. Send full-time personnel to add grease to the machine's fitness exercise position on time. Pneumatic machines should eliminate the water stored in the filter device daily to ensure that the pneumatic valve is dry, and the stored water should run into the pneumatic parts.
5. Repair part of Flat Screen Printing Machine household appliances.

       The structure of the China Flat Screen Printing Machine is divided into a workbench lift and a screen frame running up and down. Here is a simple and detailed introduction to the simple maintenance methods of the pneumatic Flat Screen Printing Machine common problems.

1. Press the start button. Common faults of the workbench without posture: First, check whether the pneumatic valve of the machine is connected and whether the elevator relay is damaged. If it is damaged, it can be replaced.
2. The workbench has already risen slowly, and the screen frame has no posture: first check whether the elevator induction switch of the workbench has long been magnetically induced to have a data signal output, and after the fault is detected, check whether the relays that operate the screen frame are damaged or blocked. After eliminating the above two common faults, the machine should be able to carry out the next posture.
3. The machine has already carried out the packaging and printing. The ink can not be returned, and the worktable can not return to the original point. It is the first to check whether the induction switch on the right side of the screen frame is magnetically induced or destroyed. After the fault is detected, the machine can carry out all normal work bingo.

       If you want to increase the service life of the Hot Air Stenter Machine, you must ensure the on-time maintenance of the Flat Screen Printing Machine, and understand the removal of common faults of the Flat Screen Printing Machine. To increase the service life of the Flat Screen Printing Machine, it is necessary to choose a Flat Screen Printing Machine with good materials.