The battery is the center of the electric spray. Under the premise of normal use, if you do not pay attention to the method of use and maintenance, it will cause certain damage to the battery. The sprayer needs to use a special charger and connect to a 220V power supply. The charger lights up red to indicate that it is charging. After the charger's green light is on, it means that the charging is basically completed, but the battery is empty at this time, and the actual charging takes 1-2 hours. Charge it immediately after going home after use to extend the life of the battery. If it is not used for a long time, it is generally charged once every two or three months to avoid damage to the battery and extend the life of the battery. If you do not pay attention to these points of use, the battery of the electric sprayer will also become less durable and will break prematurely, so users need to pay attention.
There are many types of electric sprayers, and the installation and use of different products are different. The base of the electric sprayer is generally constructed by concrete pouring. Before pouring the electric sprayer, the foundation pit should be dug, the bottom of the pit should be tamped, and then stones should be used. Or pave the bricks flat and drench them with water, place the surrounding formwork and anchor bolts, and then pour the concrete. In order to ensure that the anchor bolts are firmly buried, the one end buried in the concrete should be cut into a T-shape or herringbone shape.
If the embedded length is more than 10 times the bolt diameter and the herringbone opening length is about 100mm or more, it is better, because the correct installation can improve the use effect of the sprayer.