The content contained in the technical requirements of floodlighting is very detailed, including inspection and installation of various systems and components. These will be documented before the construction, and the construction will be carried out after the confirmation of the construction and the customer. The reason why we want to talk about this technical requirement is that our environment is not suitable for general use. We have to formulate corresponding technical indicators based on our environment. For example, the construction of cables and pipelines will involve many problems. So the editor will introduce the construction technical requirements of cables and pipelines in this article, I hope you can refer to them. Technical requirements for floodlighting are a big project. Let's take a look at the technical requirements for cables and piping first.

  The first one is to require that some of the electric tubes and steel pipes we have specified should be kept free from dents, splits, and blisters, and the corresponding material list of the product must be available. The second technical requirement of floodlighting is that we should keep the piping circumference upright and horizontal and vertical, and the corresponding deviation should be selected in strict accordance with the regulations. The third technical requirement is to specify that the distance between the relatively fixed points of the piping and the corresponding bending radius of the protective tube, as well as the related flatness of the bend, must be strictly compound construction rules. The fourth is that we use threaded fasteners to connect the steel pipes. The two ends of the connection point need to be fixed with grounding clips. For the connection between the two grounding cards, we need to rely on copper flexible wires, and their cross-sectional area should be greater than 4 square centimeters. The fifth aspect of floodlighting is for explosion-proof conduits. We will use galvanized steel pipes and threaded connections. The connection must be tight and firm. For the connection place, we must pay attention not to cross the grounding wire, and also apply conductive anti-rust ester and other materials on the thread. The sixth point is to design and process the bracket and hanger according to the conditions of the construction site. Calculate the location of the mounting bracket based on the corresponding vertical orientation of the measurement pipeline and the size of the design standard. The seventh point is the need to design a uniform fixed point distance as a basis for the installation distance between the pipe clamp and the terminal or electrical appliances and other equipment. Generally, the distance range is 150-500MM. The eighth point is to pay attention to the selection of the cable model and the corresponding specifications, which must meet the insulation characteristics. The ninth point is to pay attention to serious problems such as twisting, flattening of the armor, and breaking of the sheath when the cable is laid.

  In addition, pay attention to reserve cables. Floodlighting Through the above analysis, we gradually understand the requirements of cables and conduits required by floodlighting technology. In fact, we still need to understand some details, such as the production of cable heads. Including the selection of a suitable thread nose, attention should be paid to burrs and other issues when crimping, compression issues, and so on. We also need to train the people who make cable heads, and we can’t let untrained people take the job, otherwise, the insulation will be damaged when cutting the cable. Hope to help you. In addition, Ningbo Mingxing Lamps Co., Ltd. is a China Outdoor Lamps Manufacturers, which produces Floodlight With Microwave Sensor, RGB Floodlight And some products such as Floodlight Pir Sensor, you are welcome to purchase.