rixiang huangyan

created new article

17 days ago - Translate

Washing Machine Plastic Injection Mould Part Analysis | #mould

Washing Machine Plastic Injection Mould Part Analysis

There are basics of good injection Plastic Pail Mould for plastic washing machine parts based on its 20+ years of experience on home appliance injection moulds.

Washing Machine Plastic Injection Mould Part Analysis

created new article

1 month ago - Translate

The Advantages Of Bucket Mould Needle Valve Hot Runner | #bucket mould

The Advantages Of Bucket Mould Needle Valve Hot Runner

The needle valve hot runner technology Bucket Mould Manufacturer with its unique process control technology can improve the reliability of the parts to a higher degree, make the melt flow in the three-dimensional cavity faster and smoother, and bring faster to the parts. The cycle cycle pl

The Advantages Of Bucket Mould Needle Valve Hot Runner

created new article

2 months ago - Translate

The Function Of The Bucket Mould | #mould

The Function Of The Bucket Mould

A critical component in Bucket Mould design is choosing the correct gate. The function of the gate is a simple concept, but choosing the wrong type of gating can cause several problems during processing.

The Function Of The Bucket Mould

created new article

2 months ago - Translate

The Most Basic Medical Bucket Mould | #mould

The Most Basic Medical Bucket Mould

The plastic can be pure resin or a mixture with various additives. The resin acts as a binder. The purpose of adding additives is to improve the physical and mechanical properties of pure resin, improve processing performance or to save resin.

The Most Basic Medical Bucket Mould

created new article

4 months ago - Translate

Injection Bucket Mould Maintenance | #mould

Injection Bucket Mould Maintenance

　Before the mold is removed from the press, it is to be heated so that all surface condensation is evaporated. With the Bucket Mould still warm, internalmold surfaces should be gently cleaned with shop safety solvent to remove any residual dirt and grime, the ejector system moved fully f

Injection Bucket Mould Maintenance

Details
19 posts
Female
Nov-30--1