yingtai

Criou um novo artigo

4 anos - Traduzir

We Tell You Blow Molding Screw Barrel Removal Methods | #injection Molding Screw Barrel Single Screw Barrel

We Tell You Blow Molding Screw Barrel Removal Methods

We Tell You Blow Molding Screw Barrel Removal Methods

1. Firstly, heating the connection of Single Screw Barrel and the head of the storage cylinder above to normal process temperature.

The plastic material in the barrel is basically extruded clean.

Then remove the bolt of connection, heater, and connection wiring.

Curtir

Comentario

Compartilhar

Criou um novo artigo

4 anos - Traduzir

Single Screw Extruder Screw Barrel Problems | #injection Molding Screw Barrel Single Screw Extruder Screw Barrel

Single Screw Extruder Screw Barrel Problems

Single Screw Extruder Screw Barrel Problems

With the fast paced cycles, RPMs, and back pressures that certain process engineers can run, premature wear on the cylinder walls of an injection molding barrel can become one of the biggest reasons inconsistent shots or the inability to hold cushion to occur. In a vast amount of instances

Curtir

Comentario

Compartilhar

Criou um novo artigo

4 anos - Traduzir

Know Applications of Extrusion Screw Barrel | #bimetallic Screw Barrel Extrusion Screw Barrel

Know Applications of Extrusion Screw Barrel

Know Applications of Extrusion Screw Barrel

What is an Extrusion Screw Barrel?

A screw barrel is one of the necessary parts of the plastic processing machinery. It is required ultimate for the plastic processing type of machinery. The production process cannot completed without using the screw barrels. The tool ensures the

Curtir

Comentario

Compartilhar

Criou um novo artigo

4 anos - Traduzir

We Give An Introduction On How to Maintenance Bimetallic Screw Barrel of Machine | #bimetallic Screw Barrel Screw Barrel Manufacturer

We Give An Introduction On How to Maintenance Bimetallic Screw Barrel of Machine

We Give An Introduction On How to Maintenance Bimetallic Screw Barrel of Machine

1.

When the new machine is used for half a year, due to the wear and tear, we must check the clearance between the screw and the Bimetallic Screw Barrel every three months, and make appropriate adjustments. This should be done to avoid an excessive clearance which could cause a de

Curtir

Comentario

Compartilhar

Mudou sua imagem de perfil

4 anos

Curtir

Comentario

Compartilhar

Carregar mais posts

Info

5 Postagens
Homem
Nov-30--1

álbuns

(0)

Amigos

(5)

Matthew Gi

Skreebee

Robert Cam

Kim Camero

Elise Pete

Curtiu

(0)

Grupos

(0)

Produtos para venda